Le Pass4Past possède une équipe d'élite qui peut vous offrir à temps les matériaux de test Certification Microsoft 070-433. En même temps, nos experts font l'accent à mettre rapidement à jour les Questions de test Certification IT. L'important est que Pass4Test a une très bonne réputation dans l'industrie IT. Bien que l'on n'ait pas beaucoup de chances à réussir le test de 070-433, Pass4Test vous assure à passer ce test par une fois grâce à nos documentations avec une bonne précision et une grande couverture.
Avec la version plus nouvelle de Q&A Microsoft 70-691, réussir le test Microsoft 70-691 n'est plus un rêve très loin pour vous. Pass4Test peut vous aider à réaliser ce rêve. Le test simualtion de Pass4Test est bien proche du test réel. Vous aurez l'assurance à réussir le test avec le guide de Pass4Test. Voilà, le succès est juste près de vous.
Il y a beaucoup de gans ambitieux dansn l'Industrie IT. Pour monter à une autre hauteur dans la carrière, et être plus proche du pic de l'Industrie IT. On peut choisir le test Microsoft 70-544-VB à se preuver. Mais le taux du succès et bien bas. Participer le test Microsoft 70-544-VB est un choix intelligent. Dans l'Industrie IT de plus en plus intense, on doit trouver une façon à s'améliorer. Vous pouvez chercher plusieurs façons à vous aider pour réussir le test.
Vous allez choisir Pass4Test après essayer une partie de Q&A Microsoft 70-544-VB (gratuit à télécharger). Le guide d'étude produit par Pass4Test est une assurance 100% à vous aider à réussir le test Certification Microsoft 70-544-VB.
Code d'Examen: 070-433
Nom d'Examen: Microsoft (TS: Microsoft SQL Server 2008, Database Development)
Questions et réponses: 145 Q&As
Code d'Examen: 70-691
Nom d'Examen: Microsoft (TS: Windows HPC Server 2008, Developing)
Questions et réponses: 95 Q&As
Code d'Examen: 70-544-VB
Nom d'Examen: Microsoft (TS: Ms Virtual Earth 6.0, Application Development)
Questions et réponses: 67 Q&As
Le test de Certification Microsoft 70-691 devient de plus en plus chaud dans l'Industrie IT. En fait, ce test demande beaucoup de travaux pour passer. Généralement, les gens doivent travailler très dur pour réussir.
Choisissez le Pass4Test, choisissez le succès. Le produit offert par Pass4Test vous permet à réussir le test Microsoft 70-691. C'est necessaire de prendre un test simulation avant participer le test réel. C'est une façon bien effective. Choisir Pass4Test vous permet à réussir 100% le test.
Pour l'instant, vous pouvez télécharger le démo gratuit de Q&A Microsoft 70-691 dans Pass4Test pour se former avant le test Microsoft 70-691.
070-433 Démo gratuit à télécharger: http://www.pass4test.fr/070-433.html
NO.1 You have a SQL Server database. The database contains two schemas named Marketing and Sales.
The Marketing schema is owned by a user named MarketingManager. The Sales schema is owned by a
user named SalesManager.
A user named John must be able to access the Sales.Orders table by using a stored procedure named
Marketing.GetSalesSummary. John is not granted a SELECT permission on the Sales.Orders table. A
user named SalesUser does have SELECT permission on the Sales.Orders table. You need to implement
appropriate permissions for John and the stored procedure Marketing.GetSalesSummary.
What should you do?
A. Marketing.GetSalesSummary should be created by using the EXECUTE AS 'SalesUser' clause.
John should be granted EXECUTE permission on Marketing.GetSalesSummary.
B. Marketing.GetSalesSummary should be created by using the EXECUTE AS OWNER clause.
John should be granted EXECUTE WITH GRANT OPTION on Marketing.GetSalesSummary.
C. Marketing.GetSalesSummary should be created by using the EXECUTE AS CALLER clause.
John should be granted IMPERSONATE permission for the user named SalesUser.
D. Marketing.GetSalesSummary should be created without an EXECUTE AS clause.
John should be granted SELECT permission on the Sales.Orders table.
Answer: A
Microsoft examen 070-433 examen 070-433 070-433 examen 070-433
NO.2 You have a table named Customer.
You need to ensure that customer data in the table meets the following requirements:
credit limit must be zero unless customer identification has been verified.
credit limit must be less than 10,000.
Which constraint should you use?
A. CHECK (CreditLimt BETWEEN 1 AND 10000)
B. CHECK (Verified = 1 AND CreditLimt BETWEEN 1 AND 10000)
C. CHECK ((CreditLimt = 0 AND Verified = 0) OR (CreditLimt BETWEEN 1 AND 10000 AND Verified = 1))
D. CHECK ((CreditLimt = 0 AND Verified = 0) AND (CreditLimt BETWEEN 1 AND 10000 AND Verified =
1))
Answer: C
certification Microsoft 070-433 examen 070-433 examen 070-433 examen certification 070-433 certification 070-433
NO.3 You administer a SQL Server 2008 database that contains a table name dbo.Sales, which contains the
following table definition:
CREATE TABLE [dbo].[Sales](
[SalesID] [int] IDENTITY(1,1) NOT NULL PRIMARY KEY CLUSTERED,
[OrderDate] [datetime] NOT NULL,
[CustomerID] [int] NOT NULL,
[SalesPersonID] [int] NULL,
[CommentDate] [date] NULL);
This table contains millions of orders. You run the following query to determine when sales persons
comment in the dbo.Sales table:
SELECT SalesID,CustomerID,SalesPersonID,CommentDate
FROM dbo.Sales
WHERE CommentDate IS NOT NULL
AND SalesPersonID IS NOT NULL;
You discover that this query runs slow. After examining the data, you find only 1% of rows have comment
dates and the SalesPersonID is null on 10% of the rows. You need to create an index to optimize the
query. The index must conserve disk space while optimizing your query.
Which index should you create?
A. CREATE NONCLUSTERED INDEX idx1
ON dbo.Sales (CustomerID)
INCLUDE (CommentDate,SalesPersonID);
B. CREATE NONCLUSTERED INDEX idx1
ON dbo.Sales (SalesPersonID)
INCLUDE (CommentDate,CustomerID);
C. CREATE NONCLUSTERED INDEX idx1
ON dbo.Sales (CustomerID)
INCLUDE(CommentDate)
WHERE SalesPersonID IS NOT NULL;
D. CREATE NONCLUSTERED INDEX idx1
ON dbo.Sales (CommentDate, SalesPersonID)
INCLUDE(CustomerID)
WHERE CommentDate IS NOT NULL;
Answer: D
Microsoft examen 070-433 examen certification 070-433 070-433 examen certification 070-433 070-433 examen
NO.4 You have a computed column that is implemented with a user-defined function. The user-defined
function returns a formatted account number. The column must be indexed to provide adequate search
performance.
You plan to create an index on the computed column. You need to identify the valid combination of
ObjectPropertyEX values for the user-defined function.
Which combination should you use?
A. IsDeterministic = True
IsSystemVerified = True
UserDataAccess = False
SystemDataAccess = False
B. IsDeterministic = True
IsSystemVerified = True
IsPrecise = True
IsTableFunction = True
C. IsDeterministic = False
IsSystemVerified = True
UserDataAccess = False
SystemDataAccess = False
D. IsDeterministic = False
IsSystemVerified = True
IsPrecise = True
SystemDataAccess = False
Answer: A
certification Microsoft certification 070-433 certification 070-433 070-433 examen 070-433
NO.5 Your database is 5GB and contains a table named SalesHistory. Sales information is frequently
inserted and updated.
You discover that excessive page splitting is occurring.
You need to reduce the occurrence of page splitting in the SalesHistory table.
Which code segment should you use?.
A. ALTER DATABASE Sales
MODIFY FILE
(NAME = Salesdat3,
SIZE = 10GB);
B. ALTER INDEX ALL ON Sales.SalesHistory
REBUILD WITH (FILLFACTOR = 60);
C. EXEC sys.sp_configure 'fill factor (%)', '60';
D. UPDATE STATISTICS Sales.SalesHistory(Products)
WITH FULLSCAN, NORECOMPUTE;
Answer: B
Microsoft examen 070-433 examen 070-433 examen
NO.6 You have created an assembly that utilizes unmanaged code to access external resources.
You need to deploy the assembly with the appropriate permissions.
Which permission set should you use?
A. SAFE
B. UNSAFE
C. EXTERNAL_ACCESS
D. Default permission set
Answer: B
certification Microsoft certification 070-433 certification 070-433 certification 070-433 070-433
NO.7 You plan to add a new column named SmallKey to the Sales.Product table that will be used in a
unique constraint. You are required to ensure that the following information is applied when adding the
new column:
'a1' and 'A1' are treated as different values
'a' and 'A' sort before 'b' and 'B' in an ORDER BY clause
You need to select the collation that meets the requirements for the new column. Which collation should
you select?
A. Latin1_General_BIN
B. SQL_Latin1_General_CP1_CI_AI
C. SQL_Latin1_General_CP1_CI_AS
D. SQL_Latin1_General_CP1_CS_AS
Answer: D
certification Microsoft 070-433 examen 070-433 examen 070-433
NO.8 You have a user named John. He has SELECT access to the Sales schema. You need to eliminate
John's SELECT access rights from the Sales.SalesOrder table without affecting his other permissions.
Which Transact-SQL statement should you use?
A. DROP USER John;
B. DENY SELECT ON Sales.SalesOrder TO John;
C. GRANT DELETE ON Sales.SalesOrder TO John;
D. REVOKE SELECT ON Sales.SalesOrder FROM John;
Answer: B
certification Microsoft 070-433 examen certification 070-433
没有评论:
发表评论