On doit faire un bon choix pour passer le test IBM A2010-570 C2010-570 A2010-569. C'est une bonne affaire à choisir la Q&A de Pass4Test comme le guide d'étude, parce que vous allez obtenir la Certification IBM A2010-570 C2010-570 A2010-569 en dépensant d'un petit invertissement. D'ailleur, la mise à jour gratuite pendant un an est aussi gratuite pour vous. C'est vraiment un bon choix.
Pass4Test est un fournisseur important de résume du test Certification IT dans tous les fournissurs. Les experts de Pass4Test travaillent sans arrêt juste pour augmenter la qualité de l'outil formation et vous aider à économiser le temps et l'argent. D'ailleur, le servie en ligne après vendre est toujours disponible pour vous.
Code d'Examen: A2010-570
Nom d'Examen: IBM (Assess: IBM Maximo Asset Management V7.5 Implementation)
Questions et réponses: 207 Q&As
Code d'Examen: C2010-570
Nom d'Examen: IBM (IBM Maximo Asset Management V7.5 Implementation )
Questions et réponses: 207 Q&As
Code d'Examen: A2010-569
Nom d'Examen: IBM (Assess: IBM Tivoli Workload Scheduler V8.6 Implementation)
Questions et réponses: 134 Q&As
Les produits de Pass4Test sont recherchés par les experts de Pass4Test qui se profitent de leurs connaissances et leurs expériences dans l'Idustrie IT. Si vous allez participer le test IBM A2010-570 C2010-570 A2010-569, vous devez choisir Pass4Test. La Q&A de Pass4Test peut vous aider à préparer mieux le test IBM A2010-570 C2010-570 A2010-569 avec sa grande couiverture des questions. En face d'un test très difficile, vous pouvez obtenir le Certificat IBM A2010-570 C2010-570 A2010-569 sans aucune doute.
La solution offerte par Pass4Test comprenant un test simulation bien proche de test réel IBM A2010-570 C2010-570 A2010-569 peut vous assurer à réussir 100% le test IBM A2010-570 C2010-570 A2010-569. D'ailleur, le service de la mise à jour gratuite est aussi pour vous. Maintenant, vous pouvez télécharger le démo gratuit pour prendre un essai.
Bien qu'il ne soit pas facile à réussir le test IBM A2010-570 C2010-570 A2010-569, c'est très improtant à choisir un bon outil de se former. Pass4Test a bien préparé les documentatinos et les exercices pour vous aider à réussir 100% le test. Pass4Test peut non seulement d'être une assurance du succès de votre test IBM A2010-570 C2010-570 A2010-569, mais encore à vous aider d'économiser votre temps.
A2010-570 Démo gratuit à télécharger: http://www.pass4test.fr/A2010-570.html
NO.1 Which statement is true to review the content of a scheduled report?
A. Use the Report Administration application to view and select from a list of report outputs
B. Use the Report Administration application to choose the correct report and then click the View button
C. Use the URL from the link supplied in the e-mail to access a PDF file served up directly by the HTTP
server
D. Access the URL from the link supplied in the e-mail and then log into Maximo and select the Download
Content button
Answer: D
IBM A2010-570 A2010-570 examen A2010-570
NO.2 An asset is created and measurement points are associated. Which IBM Maximo Asset Management
V7.5 application sets Upper Limit and Lower Limit Job Plans?
A. Meters
B. Assets
C. Condition Monitoring
D. Work Order Tracking
Answer: C
IBM examen certification A2010-570 A2010-570
NO.3 A company has deployed IBM Maximo Asset Management V7.5 (Maximo) to manage the company
assets and the purchasing process. The company's purchasing process does not require an approved
purchase request (PR) in order to generate a new purchase order (PO) but the buyer reported this
problem when trying to create a new PO from an unapproved PR:
Where can this validation be turned off in Maximo?
A. Organizations application
B. Purchase Orders application
C. System Properties application
D. Database Configuration application
Answer: A
IBM examen A2010-570 examen A2010-570 certification A2010-570
NO.4 In the Receiving application, what does the Quantity Accepted field indicate?
A. The quantity of items that passed inspection
B. The quantity of items accepted for inspection
C. The quantity of items that received inspection
D. The quantity of items that are awaiting inspection
Answer: A
certification IBM A2010-570 certification A2010-570 A2010-570
NO.5 What is the purpose of commodity codes?
A. To group like items for issue
B. To group like items for purchasing
C. To group like items for classification
D. To group like items for asset bill of material
Answer: B
IBM A2010-570 A2010-570
NO.6 What are two uses for the Assignment Manager application? (Choose two.)
A. To dispatch labor and schedule work for an organization
B. To create and manage work orders for assets and locations
C. To report labor transactions by labor, by vendor/contract, by work order, or by ticket
D. To specify which organizations and sites can use the information that is on the job plan and its tasks
E. To view the requirements that were created from the work plan as well as the unplanned work on a
work order
Answer: A,E
IBM A2010-570 A2010-570
NO.7 What is the definition of a work package?
A. It groups existing work orders under a new parent work order.
B. It is a preventive maintenance work order hierarchy that has been created from a route.
C. It is a work order linked to all the originating services requests for the work order and is created from
the Related Records tab.
D. It is a group of work orders in Waiting to be Scheduled status that are the responsibility of one person
and is created in the Assignment Manager application.
Answer: A
IBM examen A2010-570 A2010-570 certification A2010-570
NO.8 What comprises a failure code?
A. Failure, affect, fix
B. Issue, reason, resolution
C. Problem, cause, remedy
D. Situation, impact, solution
Answer: D
IBM examen A2010-570 A2010-570 examen A2010-570
NO.9 If the Integrity Checker utility tool reports that some groups have no privileges in the Maximo security
tables, how could this be resolved?
A. Run the integrity checker in repair mode
B. Run the integrity checker in backup mode
C. Create a new Maximo Security group for the Maximo security tables and run the Integrity Checker
utility again
D. Create a new security group with all grants on the Maximo security tables and run the Integrity Checker
utility again
Answer: A
IBM examen A2010-570 A2010-570 examen A2010-570
NO.10 A forecast for a preventive maintenance record has been generated. How can the forecast date be
adjusted from the Preventive Maintenance application?
A. From the Forecast tab, select a forecast row, enter a value in the New Date field, click Save
B. From the Select Action menu, select Generate Forecast, enter a value in the Forecast Days field, click
OK
C. From the Frequency tab, select the Time Based Frequency tab, enter a value in the Frequency field,
click Save
D. From the Frequency tab, select the Time Based Frequency tab, enter a value in the Extended Date
field, click Save
Answer: A
certification IBM certification A2010-570 A2010-570 A2010-570 examen
NO.11 A customer has an escalation that requires notifications to go to both Marie Smith and her supervisor
Lee Tsumi. How can both users be included as recipients on a communication template?
A. Create a role for both Marie and Lee
B. Create a Person Group with Marie as the primary
C. Add both e-mail addresses on the Recipients tab
D. Include both user e-mails in the Recipient field separated by a colon
Answer: C
IBM examen A2010-570 A2010-570 A2010-570
NO.12 Which IBM Maximo Asset Management location status is necessary to associate a location with a
system.?
A. Active
B. Ready
C. Operating
D. Decommissioned
Answer: C
certification IBM A2010-570 A2010-570 examen A2010-570 certification A2010-570
NO.13 What does the Enable Repair Facilities Organization option allow?
A. Creating a work order in a site different from the site of the asset on that work order
B. Reserving items from one site to use at another site on an emergency maintenance work order
C. Moving an asset from one location to another location on an emergency maintenance work order
D. Creating a preventive maintenance (PM) record in a site different from the site of the asset on that PM
Answer: A
IBM A2010-570 A2010-570 examen A2010-570 A2010-570
NO.14 Which standard relationship is the container relationship for assets?
A. BACKUPS
B. INCLUDES
C. CONNECTS
D. INTERSECTS
Answer: B
IBM A2010-570 examen A2010-570 examen A2010-570
NO.15 What does an active workflow process define?
A. The flow of work in Application Designer
B. The process to add an attribute to an application
C. The different work to be performed by the lead craft
D. The different paths that a record can take as it moves through a business process
Answer: C
IBM A2010-570 A2010-570 examen A2010-570
NO.16 Which method is used to view labor hours, costs, and material costs for a particular work order?
A. from the Work Order Tracking application, select the Cost tab
B. from the Work Order Tracking application, go to the Select Action menu and select View > Costs
C. from the Actuals tab of Work Order Tracking application, download and summarize each of the table
windows for Labor, Materials. Services, and Tools
D. navigate to the Cost Management application, query for the work order in question to view estimated
and actual hours and costs for labor in addition to estimated and actual costs for materials and service
Answer: B
IBM examen A2010-570 A2010-570 A2010-570
NO.17 When creating a purchase request line by using the Select Spare Parts button, refined search is
allowed by specifying at least one of which two data fields? (Choose two.)
A. Site ID
B. Description
C. Item Number
D. Asset Number
E. Organization ID
Answer: A,D
IBM certification A2010-570 A2010-570 A2010-570 examen
NO.18 After fully receiving a shipment it is discovered that the item or tool has been received incorrectly. How
can a receipt be reversed from the Shipment Receiving application?
A. Find the shipment receipt, change the status to VOID from the Select Action menu, click Save
B. Find the shipment receipt, click the checkbox Void Receipt for each line to be reversed, click Save
C. Find the shipment receipt, click the button Select Receipt to Void, select each line to be voided, click
OK
D. Find the shipment receipt, click the button Select Records to Void, select each line to be voided, click
OK
Answer: D
IBM A2010-570 A2010-570 A2010-570
NO.19 Which property is used to define the directory used when importing data using the Integration
Framework?
A. Mxe.int.dir
B. Mxe.int.localdir
C. Mxe.int.globaldir
D. Mxe.int.accessdir
Answer: C
IBM A2010-570 examen certification A2010-570 A2010-570 A2010-570 A2010-570
NO.20 Which function is performed in the Quick Reporting application?
A. Create failure code hierarchies
B. Create job plans and safety plans
C. Create preventive maintenance schedules
D. Report actual labor, materials, and tools used in the work
Answer: D
IBM A2010-570 A2010-570 A2010-570 A2010-570
没有评论:
发表评论